Network Foundations
Master the fundamentals of computer networks: OSI/TCP-IP models, routing, switching, IP addressing and network diagnostics to design and maintain reliable infrastructures.
Key skills
- ✓Network architecture and OSI/TCP-IP models
- ✓Routing and switching configuration
- ✓IPv4/IPv6 addressing and subnetting
- ✓Network diagnostics and troubleshooting
The question bank for this exam is prepared after your purchase. The exam is available no later than 48 hours after payment; you will receive an email as soon as it opens.
Is this right for you?
✓ This certification is right for you if:
- →Junior network technicians (0-3 years of experience)
- →Systems administrators moving into infrastructure
- →Level 2 support engineers wishing to validate their network skills
✗ This certification is not suitable if:
- →Beginners with no IT knowledge: start with an operating systems training before this certification.
- →Senior network architects: direct yourself to our Master 801 Network Architecture & Design certification for a more advanced level.
Prerequisites & eligibility
No formal requirements. Practical experience in network support recommended.
Purchase options
Exam voucher, LMS pathway, bundle packs — build your order
Options d'achat
Composez votre parcours — voucher d'examen, préparation LMS, packs entreprise.
Skills assessed
Network architectures
Design and document LAN/WAN topologies compliant with industry standards.
Routing & switching
Configure routers and switches with static and dynamic protocols (RIP, OSPF, VLAN).
Advanced IP addressing
Master IPv4/IPv6, CIDR, subnetting and address space planning.
Network diagnostics
Use Wireshark, ping, traceroute and analysers to resolve connectivity incidents.
Exam format
Curriculum
Network fundamentals and models
OSI 7-layer model (Physical, Data Link, Network, Transport, Session, Presentation, Application), TCP/IP 4-layer model, encapsulation and de-encapsulation, PDU (frame, packet, segment), IEEE 802.3 (Ethernet), 802.11 (Wi-Fi) standards, topologies (bus, star, mesh, hybrid), equipment (hub, switch, router, firewall, AP), transmission media (copper UTP/STP, single-mode/multimode fibre), bandwidth and latency.
IP addressing and subnetting
IPv4 classes (A, B, C, D, E), private addresses (RFC 1918), public addresses, CIDR and slash notation, subnet mask calculation, VLSM (Variable Length Subnet Mask), route aggregation, IPv6 (128 bits, hexadecimal notation, address types: global/link-local unicast, multicast, anycast), EUI-64, SLAAC, DHCPv6 stateful/stateless, NAT/PAT (overload, static, dynamic), DNS (A, AAAA, PTR, CNAME resolution), ARP/NDP.
Routing and switching
Routing tables (destination, mask, next-hop, metric), static routing (default route, specific routes), dynamic routing (distance vector vs link-state, RIPv2, OSPF: areas, DR/BDR, LSA), metrics (hop count, cost, bandwidth), VLANs (802.1Q tagging, trunk/access ports, native VLAN), inter-VLAN routing (router-on-a-stick, L3 switch), Spanning Tree Protocol (STP, RSTP, PortFast, BPDU Guard), link aggregation (LACP, PAgP), CLI configuration (user/privileged/config modes, show/debug, running-config/startup-config).
Diagnostics and troubleshooting
Troubleshooting methodology (OSI model bottom-up/top-down, divide-and-conquer), diagnostic tools (ICMP ping, traceroute/tracert, nslookup/dig, netstat, ipconfig/ifconfig, arp -a), Wireshark (frame capture, BPF filters, TCP handshake analysis, retransmission detection), cabling tests (continuity tester, TDR reflectometer), network documentation (logical/physical diagrams, addressing plan, VLAN matrix), cabling standards (T568A/B, maximum distances, PoE 802.3af/at).
How to fund your certification
3 ways to cover the cost of your certification
OPCO — Employer funding
Ask your employer to cover the cost through your OPCO (employee training plan).
Personal — €350 incl. VAT
Secure online payment by credit card (Stripe).
Business rate: €460 excl. VAT
Business — custom quote
Teams, cohorts or private catalogue: a quote tailored to your volumes and goals.
Frequently asked questions
Do I need to know a specific vendor (Cisco, Juniper)?
The exam is vendor-neutral but uses Cisco CLI syntax as an industry reference. The concepts (VLAN, OSPF, STP) are universal and applicable to any vendor. Multi-vendor examples are provided in the LMS.
What practical experience is required?
6 to 12 months of experience in network support or systems administration is recommended.
Does the certification cover IPv6 in depth?
Yes, IPv6 represents approximately 30% of the addressing module: address types (unicast, multicast, anycast), notation, SLAAC auto-configuration, DHCPv6, 6to4 and dual-stack tunneling.
Can I take the exam in English?
Yes, the exam is available in French and English. As network technical vocabulary is largely English, both versions use standard terminology (VLAN, subnet, router, etc.).
Your certification pathway
Before, during, after — the recommended progression
Droits du candidat
Transparence
Les critères de décision et le barème sont documentés et accessibles avant l'examen.
Droit d'appel
Toute décision peut être contestée dans les 30 jours. Examen par un tiers indépendant.
Plainte
Toute personne peut signaler un dysfonctionnement. Formulaire public accessible sans compte.
